The usage method of the airbrush kit

In the process of spraying, improper operation of the airbrush kit will affect the spraying effect of the product. A good spraying effect is as follows: 1. The coating is evenly distributed; 2. The coating cannot be too thick or too thin. Several problems needing attention in spraying:

(air brush kit)The distance between the nozzle outlet and the coated object is called the gun distance. The smaller the gun distance, the greater the spraying pressure and the greater the impact of air pressure on the product. The coating will be uneven, resulting in the problem of excessive coating thickness. The larger the gun distance is, the smaller the spraying pressure is, and the coating is easy to be lost, so that the spraying material of the coated part is too small and the coating cannot reach the specified thickness. The spraying fan is perpendicular to the coated surface. When manually operating the spray gun, the spraying width shall not be too large, otherwise there will be the problem of average coating. The purpose of spray gun operation should always be parallel to the surface to be coated and perpendicular to the spraying sector. The operation speed is unstable, the coating thickness is uneven, the operation speed is too fast, the coating is too thin, the operation speed is too slow, and the coating is too thick. In a word, when using spraying equipment, it is necessary to achieve moderate strength and appropriate distance, so as to obtain the desired coating effect. After construction, some unfinished things also need to be improved, the cleaning of coatings and help appliances, and the remaining coating materials after use should be blocked and retained, which are all issues needing attention(air brush kit)