How to clean an airbrush

The cleaning liquid for cleaning the airbrush is made of thinner or special cleaning agent. We usually use banana water, which has the same function, but the corrosion of the gasket of the airbrush still exists, so if the airbrush is disassembled, it is completely For cleaning, it is better to use thinner to clean and protect the airbrush.

1. At the beginning, use a clean paper towel to wipe the residual paint in the cup. Some paints that have been dried can be wiped with some thinner. Do not pour the thinner to clean at the beginning, which will waste a lot of thinner. But the effect is actually the same as using paper towels.

2. For the residual paint at the bottom of the paint cup that cannot be wiped off by the paper towel, you can pour some thinner, block the nozzle with a clean paper towel, let the air flow back, stir the liquid in the paint cup, and let the paint in the cup fully dissolve. And just pour out the solvent.

3. The residual paint at the bottom can be wiped clean with a cotton swab dipped in thinner. Finally, pour in some thinner and spray it on a clean paper towel a few times to confirm that it is clean.

After the spray gun has been used several times, the entire spray gun must be disassembled and thoroughly cleaned.