We know that the paint has a certain viscosity. If the residual paint is not cleaned after the
Airbrush is operated, the atomization hole will be blocked after the paint dries, thus affecting the next spraying use. In order to ensure that the Airbrush has continuous and efficient spraying performance and has a longer service life, the cleaning and maintenance of the Airbrush should be done in time after daily spraying operations.
The daily maintenance of the
Airbrush mainly lies in cleaning, that is, the cleaning of the needle, the nozzle, the cap, and the paint channel. After using the Airbrush for the day, be sure to clean the needle, air cap and outside of the nozzle with the cleaning brush provided with the gun, and flush the paint passage with thinner. And the air cap should be installed on the Airbrush immediately after cleaning to protect the nozzle, so as not to accidentally bump the nozzle and deform it and affect the spraying effect. The hood and needle of the Twee Airbrush should be cleaned daily, but for the nozzle, it can be cleaned regularly, because once the nozzle is disassembled and not installed and tightened, it is easy to cause the gun to jump during the next spraying. Therefore, the nozzle of the Airbrush should only be disassembled and cleaned regularly. After disassembly, it is necessary to confirm the installation and tightening before installation and use.
The
Airbrush is at the top level in the world regardless of the structure of the gun body and atomization technology. If the daily maintenance and cleaning of the Airbrush is done well, the theoretical service life of the Airbrush can reach 3 years. In foreign countries, there are many Airbrush with a service life of more than 5 years. In addition to daily cleaning, it should also be done in daily Airbrush use: before starting the Airbrush and after cleaning or repairing, make sure that all parts on the Airbrush are tightened; when spraying, use the air pressure specified in the manual. The recommended air intake pressure of the Tweet Airbrush is 2.0Bar. Too high pressure will affect the spraying quality; after the spraying operation is completed, the Airbrush and the hose should be separated immediately. In addition, when cleaning the Airbrush , remember not to soak the entire Airbrush in Tianna water (scented coke water), which will greatly reduce the service life of the Airbrush .