What is the use and principle of high pressure spray gun?

What is the use and principle of high pressure spray gun?

1. The use of high pressure spray gun
If the type of control switch is differentiated, it can be divided into two types:

The first type, the interceptor type, is the control switch is off, the high pressure water remains in the operating system.

The second is that when the control switch is off, high pressure water will be discharged to the outside, this spray gun is overflow type, mainly used in the oil industry and chemical industry of condenser, heat exchanger, heat exchanger and other equipment cleaning dirt and coating workshop equipment surface rust removal, removal of old paint.

These spray guns can be installed to different nozzles according to different cleaning targets, such as the devil rotary nozzle imported from Germany distributed by Wuhan Water Ultra-High Pressure Complete Equipment Co., LTD., and the advanced nozzle imported from the United States with three-dimensional multi-direction injection and self-rotating injection, which has a unique role and effect on pipeline cleaning.

From the pressure point of view, from 100 kg to 2800 kg, high pressure spray gun can be used for food industry cleaning, electronic mechanical cleaning, ship cleaning, reinforced concrete breaking, metal and non-metal cutting and drilling holes, etc., according to these different uses to choose the appropriate spray gun nozzle is very important. The right choice can really play the effective role of the high pressure washer, the wrong choice can not achieve the due cleaning effect.

A variety of nozzles and nozzles of high pressure cleaning machines have a variety of different uses and characteristics, we should choose a good spray gun and nozzle according to the needs, better improve the cleaning efficiency. This is the ultrasonic cleaning machine for you to introduce these want to achieve the purpose.

2. Principle of high pressure spray gun

Principle: High pressure cleaning machine, is through the power device to make high pressure plunger pump produce high pressure water to wash the surface of the object, the impact force of water is greater than the dirt and the object surface adhesion, high pressure water will peel off the dirt, washed away, to clean the surface of a cleaning equipment. Because it is the use of high pressure water column to clean up dirt, unless it is very stubborn oil stains need to add a little cleaner, otherwise the foam generated by strong water pressure is enough to take away the general dirt, so high pressure cleaning is also recognized as one of the most scientific, economic, environmental protection cleaning ways.

High-pressure air compressor water gun configuration for car washing: high-pressure air compressor pump, water pipe, water gun. Building air compressor: driving device (diesel engine or motor), air compressor, air bag (air storage chamber). Principle: car wash with the water gun: water through the pump suction after compression through the water pipe, finally shot by the water gun, water gun by controlling the flow of the water nozzle to control the size of the dispersion of water, so that it is enough into the water jet.

Car wash with not more than 8Mpa pressure, generally between 5Mpa~6Mpa. Principle of air compressor: The air compressor inhales fresh air into the air chamber (primary air chamber) through the suction end, is compressed into the secondary air chamber for compression, is sent to the gas storage chamber for storage, and is finally transported to the tool for use by management. Its power comes from the diesel engine or motor bridge or direct drive work. High pressure water gun is a high pressure cleaning machine, the common name of high pressure water jet cleaning machine.