Reasons for the splitting of the airbrush

In the process of using the airbrush, there are sometimes some problems. Now we will analyze the phenomenon of the airbrush in detail, and analyze the reasons according to the phenomenon and find out the solution.
reason:
1. The viscosity of the coating is too low
2. The spraying pressure is too high
3. The inner diameter of the fan control hole is too large
4. Not enough paint
5. The atomizing air channel is blocked
Countermeasures:
1. Increase the viscosity of the paint
2. Lower the spray pressure
3. Replace the nozzle set
4. Add enough paint

5. Clean the air channel of the spray gun