The key points of airbrush operation

The key points of airbrush operation include: airbrush moving speed, trigger control, gun distance and gun holding posture, etc., the following is described for everyone:
In the process of spraying, the moving speed of airbrush has a great influence on the result of painting.
1, if the manual spray gun moves too fast, the coating is thin, thin, poor leveling, coarse;
2. If the manual airbrush moves slowly, the appearance of the coating film must be very late, and it is easy to produce a sign of flow hanging.
3. The ideal airbrush  moving speed is that after spraying, the airbrush  is full, uniform and wet on the appearance of the coating. It is necessary to have certain spraying experience to control the operation personnel.
An airbrush is controlled by the trigger. The deeper you pull the trigger, the faster the fluid moves. Polyurethane spraying machine in the process of traditional gun, the trigger is always buckled, rather than half. In order to avoid every time the end of the airbrush coating accumulation, airbrush experienced spray spray workers have to slightly relax the trigger, in order to reduce the supply.
The airbrush should be perpendicular to the substrate appearance, or as perpendicular as possible. If the airbrush is a little skewed, the effect is bound to cause the spray band to drift to one side of the flow, and the other side is thin, lack of paint, it is very likely to cause striped coating.